Table of Contents
Advertisement
Menu System Setup - MMS200
Using the Menu System on the MMS200 will allow all basic configuration setting to be made from the LED screen.
All Menu navigation is completed by using the Directional button, the Select Button, and Enter Button located on the front panel.
To navigate the menu tree, use the UP / DOWN button
l
To enter or leave a level of the menu tree, press the MENU button
l
Pressing the Enter button will select the option .
l
ADDR (Address)
Adjusts the start channel of the fixture
SET
Allows access to Sub-Menu items - Factory Default, Display, Pan / Tilt Invert, and Pan / Tilt Swap
MODE
Allows access to Sub-Menu items - Protocol and Cross Load
TEST
Allows access to Sub-Menu items - Home and Boot
INFO
Allows access to Sub-Menu items - Version, Unique ID, Fixture Hours, DMX and Software Firmware versions
MMS200 User Guide --- (Details subject to change, and clarification)
31
Advertisement
Table of Contents
