High End Systems MMS200 User Manual page 42

Test Menu (TEST)
---> Home Fixtures (HOME)
Used to home the Pan and Tilt of the MMS200 fixture
To home the fixture:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the TEST menu. Press <Enter> to select.
3. Scroll to the HOME menu press <Enter>.
4. Scroll to HOLD and press <Enter>, the fixture will begin to Home.
Test Menu (TEST)
---> Accept new Boot Code (BOOT)
When the MMS200 fixture is uploaded, occasionally it is necessary to include a new boot code with the latest software. This is
apparent when bOOT dIff appears in the display. You must accept and store the new boot code:
To accept the new Boot Code for the fixture:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the TEST menu. Press <Enter> to select.
3. Scroll to the bOOt menu press <Enter>.
4. The fixture will display YES- DONE, it will reset and then home.
5. If there is no Boot Code to upload, YES- EMPT will be displayed. Follow Cross Load procedure to update software.
Caution: Do not remove power from the fixture during the above procedure.
Test Menu (TEST)
---> Home Fixtures (SELF)
Used this menu item to independently test the Pan and Tilt movement of the MMS200 Fixture.
To test Pan or Tilt home the fixture:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the TEST menu. Press <Enter> to select.
3. Scroll to the SELF menu press <Enter>.
4. Scroll to PAN and press <Enter>, the fixture will begin to Pan test.
5. Scroll to TILT and press <Enter>, the fixture will begin to Tilt test.
MMS200 User Guide --- (Details subject to change, and clarification)
42