Riello NexSirius 006 M Instructions For The Installer And The Technical Service Centre page 83

Par Variable name
8 TEMP LIST
9 FAULT CODES
10 FAULT HISTORY
The parameters displayed in grey are not available.
Depending on the selection, the following temperatures will be displayed on the user
interface:
1. Temperature of the zone:
Zone 0, 1: room temperature
Zone 2: room temperature
Zone 3: Domestic hot water temperature
2. LWT
3. Domestic hot water temperature
4. TWB
5. TW1 (Water temperature in Zone 0, 1)
6. TW2 (Water temperature in Zone 2)
7. Not used
8. Not used
Hydronic module, zone kit, user interface and outdoor unit fault codes and alarms are
Stores the recent 4 fault codes and alarms.
EN
Description
scrolled for one second.
83 83
NExSIRIUS NExSIRIUS
Value range
Default
Min Max
1 8 1
- - -
- - -