Table of Contents
Advertisement
Operator Panel (continued)
1. Power On/Off Switch
2. Patient Key
3. Probe/Preset Key
4. Report Key
5. End Exam Key
6. TGC Sliders
7. Rotary controls
8. A/N Keyboard
9. Mode/Gain/XYZ Controls
10. Cursor Key
Touch panel
LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
11. Clear Key
12. Comment Key
13. Body Pattern/Ellipse key
14. Measure key
15. Zoom Key
16. M/D Cursor Key
17. Scan Area Key
18. Set/B Pause key
19. Trackball
20. User Defined Keys
The Touch panel enables the access of context specific controls.
The mode/function specific controls are organized in tabbed
folders. Within each folder several pages may be accessed.
Only the folders available in the current state are displayed and
can be accessed by pressing the corresponding folder tab on
the Touch panel.
At the bottom of the Touch panel, there are five combination
rotary/push buttons. The functionality of these rotaries changes,
depending upon the currently-displayed folder/page.
Functional checks
21. Steer/Width/Depth key
22. Left/Right key
23. AO and CHI keys
24. P1, P2 Printer keys
25. Freeze key
26. Store key
27. Gel holder
28. Probe Holders
4-23
Advertisement
Table of Contents
