Network Configuration - GE LOGIQ C9 Series Technical Publication

Network Configuration

NOTE:
LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
Network Configuration
1. Connect system with network.
2. Enter Utility-> Connectivity-> TCP/IP, in IP settings
window, check Enable DHCP, and select the proper
network speed in Network Speed.
Figure 7-6. Enable DHCP
If user wants to setup static IP address, uncheck Enable
DHCP option, input static address in IP-Address box,
Subnet Mask and Default Gateway box. In Network
Speed, choose the proper speed available.
Figure 7-7. Input static address
Network Configuration
7-13