Peripherals Installation Instructions - GE LOGIQ C9 Series Technical Publication

System Setup

Peripherals Installation Instructions

Sony UP-D897MD Printer Installation
Tools
Manpower
Preparations
Installation Procedure
NOTE:
3-26
No special tools needed.
One person 5 min.
1. Unpack B/W Printer.
The printer driver is customized for the LOGIQ C9 Series at the
factory; you do not need to change the settings.
1. Place the device in a suitable place.
2. Connect power cord and USB Cable on the Printer.
3. Connect the power cord with the AC output on the rear
panel of LOGIQ C9 Series, then turn on the printer.
4. Connect the printer to the USB port.
Figure 3-4. Connect UP-D897MD to LOGIQ C9 Series
LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5