Loading the System Software with USB memory stick/DVD (continued)
NOTE:
WARNING
LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
•
To select [b], only the bootable C: partition is loaded.
This option is intended for recovery of a system that will
not boot up. It is not recommended for application
software upgrade because during upgrade process, the
data on the system would possibly be impacted.
If you upgrade the software from R1.0.x to R1.1.x, DO
NOT select [2] for loading C disk only.
•
To select [c] to quit system upgrade process.
Figure 8-7. System Software load instruction
While the software install procedure is designed to
preserve data, you should select choice [b] to format disk
C only.
Loading the software
8-17