Rescuelink Installation Instructions; Multiple Rescue Functionality - GE AED Pro Operator's Manual

RESCUELINK INSTALLATION INSTRUCTIONS

Note: You will need administrator privileges to install the RescueLink software application.
To install RescueLink, follow these steps:
1. Verify your computer meets the minimum requirements as defined in RescueLink Software PC Requirements
section of this manual.
2. Quit all programs and insert the RescueLink CD into your CD ROM drive.
3. The installation routine will start automatically after inserting the CD.
If the installation routine does not start automatically, run the setup.exe file from the CD.
4. Choose your language and Click OK. The program will automatically default to the operating system language
on your computer.
5. The installation program will guide you through the installation process.
6. After successful installation, you will be able to run RescueLink by:
a. Selecting Start, All Programs, Cardiac Science Corp, RescueLink; or
b. Clicking on the RescueLink icon on your computer's desktop
c. Simultaneously selecting Ctrl +Alt +R on your keyboard

MULTIPLE RESCUE FUNCTIONALITY

The AED Pro can store up to 60 minutes of ECG monitoring time in the AED Pro's internal memory. Multiple rescues can
be stored in the internal memory, allowing the rescuer to administer additional rescues without downloading the data to a
PC. Should the internal memory become full, the AED Pro will purge rescues as needed, beginning with the oldest
rescue.
When downloading data, RescueLink will enable the user to select which rescue to download. See the RescueLink
application HELP files for more information.
2023486-201 Rev C © 2007 General Electric Company
Section 4: Data Management
Page 33 of 53