Installation - Ex-Components; Installation - Calorimetric Monitoring Head; Mechanical Installation - Thread-Mounted Monitoring Head Cst-Ex - Flow vision FC01-Ex User Handbook Manual

Flow Meter | FC01- Ex

2 .6 Installation - Ex-components

2 .6 . 1 Installation - calorimetric monitoring head

2 .6 . 1 . 1 Mechanical installation - thread-mounted monitoring head CST-Ex

Application:
Process connectors:
Material of area exposed to medium:
CST-Ex-01xxxL08xxx
G1/2A
undercut
DIN 3852/B
SW27
12
EX ATMOSPHERE
Definitions and mounting instructions
The monitoring head is designed for use as prescribed in explosive
atmospheres to directive 2014/34/EU.
The coated sensor tips are immersed into the medium of the equip-
ment group II, category 1 (zone 0 and 20)
G1/2"A (L = 27.5 mm)
G1/2"A (L = 36 mm)
1/2"NPT
stainless steel X6CrNiMoTi17 12 2, 1.4571 to DIN 17440 (V4A)
(standard material for water, acids, alkalines, gases)
nickel-based alloy Hastelloy alloy C4 2.4610
Titanium G7 3.7235
CST-Ex-01xxxL10xxx CST-Ex-03xxxL10xxx
G1/2A
ø18
undercut
DIN 3852/B
SW27
NPT1/2"-14
ø17.5
fig. 1