Flow vision FC01-Ex User Handbook Manual page 57

* ERROR LS1
switch-on value for limit switch 1 equals switch-off value for limit switch 1
* ERROR LS2
switch-on value for limit switch 2 equals switch-off value for limit switch 2.
The menu can only be quitted after correction of the error(s). To do this, return to the beginning
of the parameter selection menu by pressing t DOWN or s UP and select the menu option with
the incorrect entry for correction.
An overview of the parameter selection menu is shown on the following page.
FC01- Ex | Flow Meter
OPERATION
ON = OFF
ON = OFF
57