Renesas RL78/I1A User Manual page 42

RL78/I1A
<4>
Figure 36:
<5>
<6>
Figure 37:
R01UH0363EJ0100 Rev. 1.00
March 23, 2012
Open the "DALI Property" dialogue box by selecting the Project menu and
clicking on DALI... or simply by clicking on the "Setting" button. Choose the
appropriate settings for your evaluation.
Applilet EZ for HCD Controller DALI Property Dialogue Box
Make sure that SW2 dip switch of the RL78/I1A DC/DC LED Control Evaluation
Board is in flash programming mode, and that the USB and power supply cables
are connected correctly. Click the "Save" button and then the "All P." button.
After downloading the application, please disconnect the USB and power supply
cables and set the board to the normal operation mode.
You should now be able to control the LEDs on the RL78/I1A DC/DC LED
Control Evaluation Board via the DALI protocol by connecting a DALI master
device. For example, Renesas Electronics offers the Lighting Communication
Master Evaluation Board (EZ-0008). This board can be used as a communication
master device supporting DMX512, DALI and IR communications.
The RL78/I1A DC/DC LED Control Evaluation Board can be controlled by this
Lighting Communication Master Evaluation Board together with a GUI running on
the host PC. There is a GUI for DMX512 control and a GUI for DALI control, both
GUIs can be downloaded from the Renesas Electronics website.
System Configuration for DALI Control
Chapter 8 Applilet EZ for HCD Controller
33