Renesas RL78/I1C Quick Start Manual

Quick Start Guide
The RL78/I1C (512 KB) Fast Prototyping Board provides an entry point for evaluation, prototyping and development with the
RL78/I1C (512 KB) MCU.
Moreover, since this board incorporates an emulator circuit, you can use it for designing your own applications without needing to
make further investments in tools. This product includes through-holes for pin headers that allow access to MCU signal pins,
allowing easy prototyping with a breadboard.
(1) Package components
⚫ RL78/I1C (512 KB) Fast Prototyping Board (RTK5RL10N0CPL000BJ)
⚫ Quick Start Guide (this document)
(2) Table of board specifications
Item
Evaluation MCU
Board size
Power-supply voltage
Power-supply circuit
Push switches
Debug/serial select switch
LEDs
USB connector
Pmod™ connectors
Arduino™ UNO connectors
MCU header *1, *2
Coin-cell battery circuit
*1: This part is not mounted. Do not fit (DNF).
*2: Refer to the user's manual for pin assignments.
*3: A coin-cell battery is not included.
(3) Parts layout
Power LED
ACT LED
Micro-USB
connector
Debug/serial
Connector
select switch
Reset switch
User switch
RL78/I1C (512 KB) MCU
Sub-clock
oscillator
Part No.: R5F10NPLDFB; package: 100-pin LFQFP
On-chip memory: 512-KB ROM, 32-KB RAM, 2-KB data flash memory
Size: 53.34 mm × 111.76 mm; thickness: 1.6 mm
VDD: 1.6 V to 5.5 V; EVDD is the same voltage as VDD.
USB connector: VBUS (5-V input); VBUS is converted to 3.3 V by LDO.
2-pin external power-supply header*1
Reset switch x 1; user switch x 1
Selects debug mode or serial mode.
Power indicator: green x 1, user: green x 2, ACT LED: green x 1
Connector: Micro USB Type-B
Connector: Angle type, 12 pins x 2
Connector: 6 pins x 1, 8 pins x 2, 10 pins x 1
The interface is compatible with Arduino™ UNO R3.
Header: 50 pins x 2
Coin-cell battery: CR2032 (3 V) holder *3
RL78/I1C (512 KB)
Fast Prototyping Board
Specification
Six analog pins
TM
for Arduino
Uno R3
Uno R3
Uno R3
Eight power pins
TM
for Arduino
Uno R3 Uno R3
Uno R3
TM
Pmod
Uno R3
connector 1
コネクタ
MCU header
(51 to 100)
User LEDs
MCU header
(1 to 50)
TM
Pmod
connector 2
コネクタ
Ten digital pins
TM
for Arduino
Uno R3 Uno R3
Uno R3
Eight digital pins
Uno R3 TM
for Arduino
Uno R3
Uno R3
Uno R3
R20UT4946EJ0100
Uno R3