System Requirements; Package Contents - Renesas RL78/I1A User Manual

RL78/I1A
 Various input / output signals available, such as
 The IAR Embedded Workbench for RL78 and the IAR C-SPY debugger are
 Full documentation is included for the Renesas software tools and the RL78/I1A

1.2 System requirements

HOST PC
Host interface

1.3 Package contents

R01UH0363EJ0100 Rev. 1.00
March 23, 2012
 All I/O ports prepared to be connected to user hardware
 Virtual UART interface, via the µPD78F0730 78K0 8-bit microcontroller
with on-board USB interface
included. These packages are restricted in such that maximum program code
size is limited to 16 Kbytes.
device.
A PC supporting Windows XP, Windows Vista or 7 is required for the
development tools installation. A Pentium processor with at least 1 GHz
CPU performance, with at least 256 Mbytes of RAM, allowing you to fully
utilize and take advantage of the product features.
350 Mbytes of free disk space and an additional 10 Mbytes of free disk
space on the Windows system drive.
A web browser and Adobe Acrobat Reader to be able to access all the
product documentation.
USB interface that enables communication based on USB (Ver1.1 or later)
Please refer to the Package Contents List supplied with the product.
If any part is missing or seems to be damaged, please contact the dealer from
whom you received your RL78/I1A DC/DC LED Control Evaluation kit.
Chapter 1 Introduction
2