Chapter 8 Applilet Ez For Hcd Controller; General Settings - Renesas RL78/I1A User Manual

RL78/I1A
Chapter 8

8.1 General Settings

<1>
Figure 15:
R01UH0363EJ0100 Rev. 1.00
March 23, 2012
Applilet EZ for HCD Controller
Applilet EZ for HCD Controller is a software tool used to automatically generate
software code for the RL78/I1A microcontroller (and also for the 78K0/Ix2), which
is used to control the LED current.
Software can be easily generated by specifying the setting and operation of the
RL78/I1A on the GUI. The generated software can be directly written into the
flash memory of the RL78/I1A microcontroller via a USB cable and the operation
can be performed and checked by using the RL78/I1A DC/DC LED Control
Evaluation Board.
By using Applilet EZ for HCD Controller, a digital RL78/I1A-based lighting system
can be designed without requiring a detailed knowledge of complex programming
languages. Furthermore, microcontroller software development, which can
usually take a certain amount of time, and operation evaluation can be
significantly reduced.
For further information please refer to the "Applilet EZ for HCD Controller User's
Manual" which can be found on the Renesas website.
This section will go through the different Applilet EZ for HCD Controller's general
settings.
Open Applilet EZ for HCD Controller.
Applilet EZ for HCD Controller Main Window

Chapter 8 Applilet EZ for HCD Controller

22