Renesas RL78/I1A User Manual page 4

Warnings
Warning
Be careful to avoid burns.
The temperature of this part of board increases when AC power is connected.
Be careful of LED brightness and the LED On/Off interval.
Simulations of strong light may cause symptoms linked to an epileptic condition.
Do not use this board for a purpose other than the evaluation of an MCU.
This board does not include the safety measures or anti-EMI measures required for lighting
equipment.
Do not heat the board or expose it to fire and do not short the terminals.
Doing so may cause the product to fail, heat up, catch fire, or rupture.
Do not disassemble or modify the board.
Doing so may cause the product to fail, emit smoke, or catch fire, or result in electric shock.
Do not touch with wet hands.
Doing so while connected to power may cause the product to fail or result in electric shock.
Do not look directly at the LEDs on this board.
Doing so may weaken eyesight.
Do not drop the board or subject the board to heavy impact.
Doing so may break or damage the board, causing fire or electric shock.
Do not turn on the power switch when the AC adapter, interface cable, or other cables are
not properly connected.
Doing so may cause the product to fail, heat up, or catch fire, or result in electric shock.
Do not plug in or unplug a connector or cable with power applied to the board.
Doing so may cause the product to fail, heat up, or catch fire, or result in electric shock.
Do not move this board when the AC adapter or any cables are connected.
Doing so may damage cables and cause the product to fail, heat up, or catch fire, or result in
electric shock.
Use this board with a spacer and on an electrically isolated bench.
If a conductor contacts the board, the product may fail, heat up, or catch fire, or it may result in
electric shock.
Use an AC adapter adapted to the safety standard of each country.
Using an inappropriate AC adapter may cause the product to fail, heat up, or catch fire, or result
in electric shock.
Use the specified AC adapter.
Using an AC adapter other than that specified may cause the product to fail, heat up, or catch
fire, or result in electric shock.
Use an AC adapter of the following size and DC plug polarity.
EIAJ Type2 Plug (outer diameter: 4.0 mm, inner diameter: 1.7 mm)
Using another type of AC adapter may cause the product to fail, heat up, or catch fire, or result in
electric shock.
Confirm that the outlet is near this board and can be easily unplugged.