Fix Dimmer Program - Renesas RL78/I1A User Manual

RL78/I1A
Note
<5>
Figure 19:

8.2 Fix Dimmer Program

<1>
<2>
Figure 20:
<3>
R01UH0363EJ0100 Rev. 1.00
March 23, 2012
Make sure that you have installed the selected compiler correctly to your host PC
before building the project.
It is also possible to configure the output project folders by clicking on the Setting
menu and then selecting Project Folder.
These locations will specify the output paths of the generated files. Enter in your
desired destination but please keep in mind that Applilet EZ will then create
subdirectories under this folder for each Applilet EZ project. Click OK.
Applilet EZ for HCD Controller Project Folder
This program sets a fixed duty value for each of the 3 LED channels. Make sure
that all settings explained previously are still correctly set before proceeding with
the following steps.
Make sure "Fix Duty" is still selected as the dimmer program.
Input "128" to all the channels so they are not too bright.
Applilet EZ for HCD Controller Fix Duty Settings
We can then save the new Applilet EZ project (.hcd file). Select the File menu,
then click on Save As... or simply click on the "Save" button, and input "fix.hcd"
for example. To finish click Save.
Chapter 8 Applilet EZ for HCD Controller
24