RL78/I1A
Figure 21:
<4>
Figure 22:
<5>
Figure 23:
R01UH0363EJ0100 Rev. 1.00
March 23, 2012
Applilet EZ for HCD Controller Save As Window
Please make sure to set the SW2 dip switch to the flash programming mode.
Then plug the power cable to the RL78/I1A DC/DC LED Control Evaluation
Board, and plug the USB connector. Click the "All P." button.
Applilet EZ for HCD Controller All Program Button
You will be informed about the progress of the compilation.
Applilet EZ for HCD Controller Compilation Progress
Chapter 8 Applilet EZ for HCD Controller
25