2
Setting up the M5302A module
2.2.8: Installing required software
42
The PC should be shut down before the chassis is powered down. This will
prevent the chassis, as it's being powered down, from disrupting operation
of the PC.
In brief, the PC should be off whenever the chassis is powered up or down.
Because chassis modules are not hot-swappable, chassis modules should
only be added or removed when the chassis is powered down. The power
sequence described above doesn't apply to an embedded controller
installed in the chassis because the embedded controller and chassis are
powered together.
After the PC boots up and Windows desktop appears, you must install the
software required for programming the M5302A modules. See
"Setting up the M5302x software".
M5302A PXIe LVDS Digital IO Modules Startup Guide
Chapter
3,