Conducting Self Test - Keysight Technologies M5302A Startup Manual

2.3.3: Conducting Self test

M5302A PXIe LVDS Digital IO Modules Startup Guide
The next step in this process is to conduct a Self Test of the M5302A
module.
1 Click Start > Keysight M5302x PCIe Module > M5302x SFP (x64) to
launch the M5302x SFP.
2 On the Connect to Instrument window that appears, select the
M5302A module you wish to run the self test on, and click Connect.
Figure 18
If the module and its slot location is not visible in the "Connect to
NOTE
Instrument" dialog box, close the SFP and perform the steps described in
the "Verifying M5302A connection" section. After running Keysight
Connection Expert, you may restart the SFP.
3 From the main menu of the M5302x SFP, click Utilities > Self Test....
Viewing module connections in M5302x SFP
Setting up the M5302A module 2
47