Safety Summary - Keysight Technologies M5302A Startup Manual

Safety Summary

M5302A PXIe LVDS Digital IO Modules Startup Guide
The following general safety precautions must be observed during all phases of operation
of this instrument. Failure to comply with these precautions or with specific warnings or
operating instructions in the product manuals violates safety standards of design,
manufacture, and intended use of the instrument. Keysight Technologies assumes no
liability for the customer's failure to comply with these requirements. Product manuals
are provided on the Web. Go to
the Search field at the top of the page.
Do not use the device if it is damaged. Contact your Keysight
WARNING
sales representative for replacement of device.
Verify that all safety precautions are taken. Make all connections
WARNING
to the unit before applying power. Note the external markings
described under "Safety symbols & instrument markings".
Do not operate the device in an explosive atmosphere or wet
WARNING
environments. Do not operate the instrument around flammable
gases or fumes, vapor, or wet environments.
Do not install substitute parts or perform any unauthorized
WARNING
modification to the product. Return the product to a Keysight
Sales and Service Office to ensure that safety features are
maintained.
If the device is used in a manner not specified by the manufacturer,
CAUTION
the protection provided by the device may be impaired.
Do not attempt to clean the device. If cleaning the card is
CAUTION
absolutely necessary, follow the instructions given in "Cleaning the
module" section of this document.
www.keysight.com and type in your product number in
3