Equipment Supported With M5302A Modules - Keysight Technologies M5302A Startup Manual

1 Overview on M5302A PXIe LVDS Digital IO Modules

1.2.3: Equipment supported with M5302A modules

Required equipment
PXI Chassis
PXIe Embedded Controller
100 pin differential cable*
SMB plug to SMB plug Cable
Breakout Board for IO
20
Therefore, to drive LVDS outputs back into your own circuit, you must
either drive the input line high or override this from the module driver.
Table 3 List of supported equipment
Quantity
1 (choose one model)
1
1
8
1
* The connector on the M5302A module is 1254-4244, which is ERF8-RA from Samtec:
ERF8-050-01-L-D-RA-L-TR. You can plug into this connector with a cable or a plug-in
board using the correct Samtec mate (ERM8 for a board, ERCD or ERDP for a cable). For
a plug-in board, the part number should be the right-angle version:
ERM8-050-01-S-D-RA-l-TR (KPN: 1254-4454). The selective gold option (-S) is not
needed. However, the option (-L) adds ESD latches, which is highly recommended, if you
frequently plug it in.
Recommended Part number(s)
M9010A, M9018B, M9019A
M9037A
ERCD-050-12.00-TEU-TED-1-D
(Samtec 0.80 mm Edge Rate® Coax Cable Assembly)
PE33704LF-12
(SMB Plug to SMB Plug Cable 12 Inch Length Using RG316-DS Coax, RoHS)
-
M5302A PXIe LVDS Digital IO Modules Startup Guide