Keysight Technologies M5302A Startup Manual page 80

3 Setting up the M5302x software
80
3 For the Project Type, choose the BSP for M5302A module to design the
FPGA. If the Board Support Package appears here, it indicates that the
BSP is successfully installed.
Figure 50
Additional Steps
Once you design your custom FPGA logic on the selected module, you may
generate the Bitstream file (k7z file), which can then be loaded onto the
M5302A sandbox, using the M5302x software API.
For detailed instructions on generating the Bitstream file and to
understand the features of the PathWave FPGA 2020 software, refer to the
PathWave FPGA Help file accessible via the Help menu of the PathWave
FPGA 2020 Update 1.1 software.
Following steps give you a quick glance into generating a bitstream file for
an M5302A module using the PathWave FPGA 2020 Update 1.1 software.
1 Towards the end of a new project creation, verify all information
displayed in the Project Summary. To make any amendments, click
Selecting the module-specific BSP
M5302A PXIe LVDS Digital IO Modules Startup Guide