Keysight Technologies M5302A Startup Manual page 79

M5302A PXIe LVDS Digital IO Modules Startup Guide
The BSP for M5302A modules is installed as part of the M5302x software
installation, which lets you proceed further with creating a new project in
PathWave FPGA to design the sandbox region for the corresponding
module. In this way, you can verify if the BSP is installed successfully or
not.
1 On the main window of the PathWave FPGA 2020 Update 1.1 software,
click the icon for new project.
A new sandbox project dialog appears.
Figure 49 Creating a new Sandbox project
2 Click Next >.
Setting up the M5302x software 3
79