NAiS FP Series Hardware Manual page 46

FP0 Hardware
E8X
12
Power supply connector
1
Supply 24V DC. It is connected using the power supply cable (AFP0581) that comes with the unit.
Input terminal (9-pin)
2
Output terminal (9-pin)
3
The input and output terminals (
(product number: 1840434)
Input connector (10-pin)
4 12
Output connector (10-pin)
5 14
Input connector (10-pin y 2)
6 13
Output connector (10-pin y 2)
7 15
Use a MIL type connector for the input and output connectors (
Expansion hook
8 11
is used to secure expansion units.
Expansion connector
9
connects an expansion unit to the internal circuit of the expansion I/O unit
DIN rail attachment lever
10
allows simple attachment to a DIN rail.
The lever is also used for installation on FP0 slim type mounting plate (AFP0803).
Matsushita Electric Works (Europe) AG
E16X
13
and ) use a terminal block socket made by Phoenix Contact Co.
2 3
(see page 9 - 12).
16
E8YT/E8YP
14
to )
4 15
3.1 Parts and Terminology
E16YT/E16YP
15
(see page 9 - 14).
(see page 8 - 5).
3-3