NAiS FP Series Hardware Manual page 29

Control Units
2.2.4 Performance Specifications
Item
Programming method/Control method
Controllable I/O points
Program memory
Program capacity
Numbers of instruction
Operation speed
I/O update time and Base time
Operation Relays
memory
points
Note
The proportion of timer points to counter points can be changed
using system register 5. See FP0 Programming Manual.
2-8
C10CRS
Relay symbol/Cyclic operation
Control unit only total: 10
Input:
Output: 4
When the expansion max. 58
unit is the same
output type as the
control unit
When the expansion max. 106
unit is a transistor
output type
Built in EEPROM (no back-up battery required)
2,720 steps
Basic instruction 83 types
High-level 114 types
instruction
0.9µs/step (basic instruction)
Without expansion: 0.3ms
With expansion: 0.3ms + (1 × Number of expansion unit) ms
Internal relay (R) 1,008 points (R0 to R62F)
Special internal 64 points (R9000 to R903F)
relay (R)
Timer/Counter (T/C) 144 points (initial setting is 100 timer points, T0 to T99 / 44
counter points, C100 to C143 (see notes)
Timer range: 1ms, 10ms, 100ms, 1s; selected by instruction
Relay output type
C10RS C14RS
C14CRS
total: 14
6 Input: 8
Output: 6
max. 62
max. 110
Matsushita Electric Works (Europe) AG
FP0 Hardware
Transistor output type
C16T C32T
C16CT C32CT
C16P C32P
C16CP C32CP
total: 16 total: 32
Input: 8 Input: 16
Output: 8 Output: 16
max. 112 max. 128
max. 112 max. 128
RAM,
battery
back–up
5,000 10,000
steps steps
115 types
T32CP