NAiS FP Series Hardware Manual page 164

FP0 Hardware
Address Name of system register
Input 400 High-speed
setting counter mode
settings (X0 to
x2)
Notes
If the operation mode is set to 2–phase, individual, or direction
differentiation, the setting for CH1 is invalid.
If reset input settings overlap, the setting of CH1 takes
precedence.
If system register 400 to 403 have been set simultaneously for
the same input relay, the following precedence order is
effective: [High–speed counter] –> [Pulse catch] –> [Interrupt
input].
Matsushita Electric Works (Europe) AG
Default
value
Setting by FP H0
programmer II
A.2 Tables of System Registers
Set value (parameter)
CH0/
H 0 0
CH1
0: Do not use high-
speed counter.
1: 2-phase input (X0,
X1)
2: 2-phase input (X0,
X1), Reset input
(X2)
3: Incremental input
(X0)
4: Incremental input
(X0), Reset input
(X2)
5: Decremental input
(X0)
6: Decremental input
(X0), Reset input
(X2)
7: Individual input (X0,
X1)
8: Individual input (X0,
X1), Reset input
(X2)
9: Direction dicision
(X0, X1)
A: Direction dicision
(X0, X1), Reset
input (X2)
0: Do not use high-
speed counter.
3: Incremental input
(X1)
4: Incremental input
(X1), Reset input
(X2)
5: Decremental input
(X1)
6: Decremental input
(X1), Reset input
(X2)
A-9