NAiS FP Series Hardware Manual page 161

System Registers
A.2 Tables of System Registers
C10, C14, C16 and C32 in the table respectively indicate 10-point, 14-point, 16-point
and 32-point type FP0 control units.
The explanations in this chapter often utilize NPST–GR conventions. When using
FPWIN Pro for programming, please note these slight differences:
Hexadecimal values are represented by the prefix 16# and not H.
Decimal values do not require a K prefix.
Moreover in FPWIN Pro, there is an "Additional Information" column for each System
Register that briefly explains its use.
Address
Allocation 0
of user
memory
1 to 3
Hold/ 5
Non–
hold hold
6 to 8
9 to 13
14
15
Action on 20
error
21, 22
23
24, 25
26
27 to 29
4
A-6
Name of system register
Sequence program area
capacity
Unused
Timer and counter division
(setting of leading counter
number)
Unused
Unused
Unused
Unused
Disable or enable setting for
duplicated output
Unused
Operation setting when an I/O
verification error occurs
Unused
Operation setting when an
operation error occurs
Unused
Unused
Default
Set value (parameter)
value
The set values are fixed and cannot be
changed.
The stored values vary depending on the
model and type.
K3: 3 K words (FP0 C10, C14, C16)
K5: 5 K words (FP0 C32)
K100 K0 to K144
For detailed information,
With the FP0, values set with the program-
ming tool become invalid.
With the FP0, values set with the program-
ming tool become invalid.
K0 K0: Disable (will be syntax error)
K1: Enable (will not be syntax error)
K0 K0: Stop
K1: Continuation
K0 K0: Stop
K1: Continuation
With the FP0, values set with the program-
ming tool become invalid.
Matsushita Electric Works (Europe) AG
FP0 Hardware
* see page
A-4.