NAiS FP Series Hardware Manual page 172

FP0 Hardware
Address Name
R9016,
R9017
R9018 0.01s clock pulse
relay
R9019 0.02s clock pulse
relay
R901A 0.1s clock pulse
relay
R901B 0.2s clock pulse
relay
R901C 1s clock pulse relay
R901D 2s clock pulse relay
R901E 1min clock pulse
relay
R901F
R9020 RUN mode flag
R9021 to
R9025
R9026 Message flag
(see note)
R9027 Remote mode flag
(see note)
R9028
R9029 Forcing flag
(see note)
R902A External interrupt
(see note) enable flag
R902B Interrupt error flag
(see note)
Note
Used by the system.
Matsushita Electric Works (Europe) AG
Description
Not used
Repeats on/off operations in 0.01s cycles.
(on : off = 0.005s : 0.005s)
Repeats on/off operations in 0.02s cycles.
(on : off = 0.01s : 0.01s)
Repeats on/off operations in 0.1 s cycles.
(on : off = 0.05s : 0.05s)
Repeats on/off operations in 0.2s. cycles
(on : off = 0.1s : 0.1s)
Repeats on/off operations in 1s cycles.
(on : off = 0.5s : 0.5s)
Repeats on/off operations in 2s cycles.
(on : off = 1s : 1s)
Repeats on/off operations in 1 min cycles.
(on : off = 30s : 30s)
Not used
Turns off while the mode selector is set to PROG.
Turns on while the mode selector is set to RUN.
Not used
Turns on while the F149 (MSG) instruction is executed.
Turns on while the mode selector is set to REMOTE.
Not used
Turns on during forced on/off operation for I/O relay and timer/counter con-
tacts.
Turns on while the external interrupt trigger is enabled by the ICTL instruction.
Turns on when an interrupt error occurs.
B.1 Special Internal Relays
0.01s
0.02s
0.1s
0.2s
1s
2s
1min.
B-3