NAiS FP Series Hardware Manual page 24

FP0 Hardware
C16T/C16CT
C16P/C16CP
11
15
12
16
13
14
Status indicator LEDs
1 11 17
display the operation mode and error statuses
Mode switch
2 12 18
changes the operation mode
Tool port (RS232C)
3 13 19
is used to connect a programming tool
Power supply connector
4 14 19
Supply 24 V DC. It is connected using the power supply cable (AFP0581) that comes with the unit.
Input terminal (9-pin)
5
Output terminal (9-pin)
6
The input and output terminals use a terminal block socket made by Phoenix Contact Co. (product
number: 1840434) (see page 9 -
Expansion hook
7 10
is used to secure expansion units. The hook is also used for installation on FP0 flat type mounting
plate (AFP0804).
Expansion connector
8
connects an expansion unit to the internal circuit of the control unit
DIN rail attachment lever
9
allows simple attachment to a DIN rail.
The lever is also used for installation on FP0 slim type mounting plate (AFP0803).
Input connector (10-pin)
15
Output connector (10-pin)
16
Use a MIL type connector for the input and output connectors (
Input connectors (10-pin y 2)
21
Output connectors (10-pin y 2)
22
Use a MIL type connector for the input and output connectors (
RS232C port
23
Use this port to connect to devices with an RS232C port, such as an I.O.P., a bar code reader, or an
image checker, enabling data input and output.
Matsushita Electric Works (Europe) AG
C32T/C32CT
C32P/C32CP/T32CP
17
21
18
22
19
20
(see page
(see page 2-4).
(see page 2-4).
24 25 26 27
12).
28 29 30 31 32
33 34 35 36
(see page 9 - 16
2.1 Parts and Terminology
Control unit with RS232C port
2-4).
(see page 8 -
and ) (see page 9 -
15 16
and ) (see page 9 -
21 22
).
23
5).
14).
14).
2-3