FP0 Hardware
– Do not install the FP0 control unit as shown below.
– Do not install the unit above devices which generate
Installation space
– Leave at least 50mm/1.97in. of space between the
Matsushita Electric Works (Europe) AG
Upside-down
Installation which blocks
the air duct
Horizontal installation of the unit
heat such as heaters, transformers or large scale
resistors.
wiring ducts of the unit and other devices to allow
heat radiation and unit replacement.
I/O connectors or I/O terminals on top
Installations such that the I/O
connectors or I/O terminals face down
8.1
Important Notes
8-3