34
A.2
Power Specifications
All voltages required by the IsoPlane 81 system are generated and delivered by an
external power supply included with each IsoPlane 81 system.
Refer to Table A-2 for power specifications for the external IsoPlane 81 power supply.
Table A-2: Power Specifications
Input
Voltage
Frequency
Output
Voltage
Current
Power
A.3
Environmental Specifications
Refer to Table A-3 for environmental specifications.
Table A-3: IsoPlane 81 Environmental Specifications
Storage Temperature
Operating Temperature
Operating Ambient Relative Humidity
®
IsoPlane
81 Imaging Spectrometer System Manual
!
CAUTION!
Use of a power supply other than that provided with the
IsoPlane 81 system will void the system warranty. For
specific power supply requirements, contact Teledyne
Princeton Instruments. Refer to Contact Information (in the
Warranty and Service section at the end of this manual) for
complete information.
Parameter
Minimum
Parameter
NOTE:
The cooling performance may degrade if the room
temperature is above +23°C.
Specification
Nominal
90
–
47
–
–
18
–
–
–
–
Specification
Minimum
Nominal
-20°C
+5°C
<80% (non-condensing)
Issue 1
Units
Maximum
246
V
AC
63
Hz
–
V
DC
4.45
A
80
W
Maximum
+55°C
+30°C