14
No soap, solvents, or abrasives should be used. Not only are they not required, but they
could damage the finish of the surfaces on which they are used.
2.3.2
Repairs
Because the IsoPlane 81 system contains no user-serviceable parts, repairs must be
performed by Teledyne Princeton Instruments. Should the system need repair, contact
Teledyne Princeton Instruments customer support for instructions. Refer to
Information
Save the original packing materials and use them whenever shipping the system or
system components.
2.4
Available Accessories
Refer to Table 2-3 for information about accessories that are available for use with the
IsoPlane 81.
Table 2-3:
IsoPlane 81 Slit
IsoPlane 81 Slit
IsoPlane 81 Slit
IsoPlane 81 Slit
IsoPlane 81 Slit
IsoPlane 81 Slit
IsoPlane 81 Slit
IsoPlane 81 Slit
IsoPlane 81 Slit
®
IsoPlane
81 Imaging Spectrometer System Manual
on page 60 for complete information.
Available IsoPlane 81 System Accessories (Sheet 1 of 5)
Accessory
Interchangeable input slit;
Precision laser-cut slit, 10
3.3 mm tall.
Interchangeable input slit;
Precision laser-cut slit, 25
3.3 mm tall.
Interchangeable input slit;
Precision laser-cut slit, 50
3.3 mm tall.
Interchangeable input slit;
Precision laser-cut slit, 100
3.3 mm tall.
Interchangeable input slit;
Precision laser-cut slit, 150
3.3 mm tall.
Interchangeable input slit;
Precision laser-cut slit, 200
3.3 mm tall.
Interchangeable input slit;
Precision laser-cut slit, 300
3.3 mm tall.
Interchangeable input slit;
Precision laser-cut slit, 500
3.3 mm tall.
Interchangeable input slit;
Precision laser-cut slit, 25
Description
μ
m width,
μ
m width,
μ
m width,
μ
m width,
μ
m width,
μ
m width,
μ
m width,
μ
m width,
μ
m pinhole.
Issue 1
Contact
Part Number
ISO81-SLIT-10
ISO81-SLIT-25
ISO81-SLIT-50
ISO81-SLIT-100
ISO81-SLIT-150
ISO81-SLIT-200
ISO81-SLIT-300
ISO81-SLIT-500
ISO81-SLIT-H