Teledyne Princeton Instruments IsoPlane 81 Manual page 24

24
Figure 4-4: Peak Finding Options
8. Using the 5/64" Allen wrench, turn the focus screw, located on the side of the
IsoPlane 81, clockwise until the peak width has noticeably increased. Then turn the
screw counter-clockwise until peak width has reached a minimum value. At this
point, the slit is focused. See Figure 4-5.
Figure 4-5: Focus Adjustment Screw
9. Within LightField, click
®
IsoPlane 81 Imaging Spectrometer System Manual
to halt data acquisition.
Issue 1