Datex-Ohmeda AS/3 Compact Monitor Technical Reference Manual page 68

Datex-Ohmeda AS/3 CM and CS/3 CMC
LCD display
14.
Press
Press the ComWheel and return to the Install/Service menu by selecting Previous Menu
15.
Installation - Display Setup - LCD Colors.
?
Command Board / Anesthesia Keyboard
16.
?
17.
?
Remote Controller
18.
?
60
Document No. 896 623
Check that the picture on the LCD display screen is clear and stable.
Monitor Setup key
Install/Service (password 16-4-34)- Service (password 26-23-8) - Display
Select Colors and check that all colors are clear.
twice.
?
Monitors with software S-_97 and F-CM(REC) Rev 03 or F-CMC(REC) Rev 00 or newer:
Check the LCD display screen setup:
Check that the menu and digit field background colors change between the settings 8 and
16. Return the original setting.
Help
Press the key. Check that the key opens the corresponding menu on the screen.
Turn the ComWheel in both directions and check that the cursor in the menu moves
correspondingly.
Highlight Normal Screen, press the ComWheel and check that the menu disappears from
the screen.
Check the Command board membrane keys, and the corresponding keys on the Anesthesia
keyboard, if connected.
Press the keys one by one. Check that each key generates a sound from the loudspeaker
and the corresponding text in Service Data changes its color.
Menu
Press the key. Check that the key opens the corresponding menu on the screen.
Turn the ComWheel in both directions and check that the cursor in the menu moves
correspondingly.
Highlight Normal Screen, press the ComWheel and check that the menu disappears from
the screen.
and select: