Bar Code Reader; Connection To The Compact Monitor; Different Configurations - Datex-Ohmeda AS/3 Compact Monitor Technical Reference Manual

Datex-Ohmeda AS/3 Compact Monitor, CS/3 Compact Monitor

3.13 Bar Code Reader

3.13.1 Connection to the Compact Monitor

The bar code reader can be connected to the K-ARK connector on the monitor.
Figure 14

3.13.2 Different Configurations

The bar code reader comes from HP factory with factory default settings. These settings are slightly
modified at Datex-Ohmeda factory to match Datex-Ohmeda applications. The following table
shows the differences between the HP configuration and the Datex-Ohmeda configuration.
Option
Message components
Header
No-read
Keycodes
Key delay
The default settings can also be modified outside the factory by scanning special bar code labels
from the documentation that comes with the scanner. To do this the scanner should be connected
to the keyboard port of your PC.
42
Document No. 896 623
Bar Code Reader connected to the Compact Monitor
HP configuration
[<<61>>]
[<<61>><<61>>]
[1] ms
Datex-Ohmeda configuration
[hhh]
[]
[12] ms