Angelo Po 090BM1E Use And Installation Manual page 22

See tables and "Connection chart" at the back of
the manual.
Although the appliance is complete with all safety
devices, during installation and connection addi-
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
A)Automatic resetting Thermostat: cuts off the
electricity supply in case of overheating. Once
the cause has been eliminated and temperature
is reduced, operation is restored automatically.
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.
The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
IT
data.
B)General hazard: read the manual carefully before
carrying out any procedure.
GB
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
DE
D)General hazard: dry operation is forbidden.
E)General hazard: all relevant regulations must be
FR
complied with. "Install in compliance with the rele-
vant regulations and use in well ventilated premises
only".
ES
F) General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of fail-
ure to comply with the installation and commission-
ing instructions".
G)CE marking: indicates that the appliance is compli-
ant with the relevant norms.
H)WEEE symbol: indicates that the appliance is sub-
ject to specific waste disposal regulations.
English
TECHNICAL DATA
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
A
C B D
- 4 -
IDM-39615700300.tif
E
F
A
IDM-39615700400.tif
G
H