Table of Contents
Advertisement
HANDLING AND INSTALLATION
Important
When handling and installing the appliance
comply with the information provided by
the constructor directly on the packaging,
on the appliance and in the instructions for
use.
The packaging is designed to reduce space and as ap-
propriate to the type of transport used. To simplify trans-
port, some components may be removed and suitably
protected and packed for transport.
The packaging carries all information necessary for
loading and unloading. When unpacking, check that all
components are present in the correct quantities
and are undamaged.
The packaging material must be properly dis-
posed of in accordance with legal requirements.
Different means of transport may be used, depending
partly on the destination.
The chart shows the most commonly used alterna-
IT
tives.
During transport, fix the packaging to the means of
AUS
transport securely to prevent undesirable shifting.
SDE
FR
ES
The appliance can be handled using fork-lift or hook
equipment of suitable load-carrying capacity.
Before lifting, check the position of the load's centre of
gravity.
Important
When engaging with the lifting equipment,
watch out for the gas supply pipe.
RECOMMENDATIONS FOR HANDLING AND INSTALLATION
PACKAGING AND
TRANSPORT
HANDLING AND LIFTING
If necessary, the person authorised to carry
out these operations must organise a "safe-
ty plan" to protect the people directly in-
volved.
- 10 -
IDM-3960330800.tif
Lifting
equipment
Means of transport
IDM-3960200180.tif
IDM-39603306600.tif
7
Advertisement
Table of Contents
