Angelo Po 0G1CP1G Use And Installation Manual page 14

To make the connection, connect the mains line to the
appliance's connection pipe, fitting a shut-off tap (A),
to allow the water supply to be cut off when necessary.
Easily accessible filters must be fitted downstream of
the tap.
To make the connection, connect the mains line to the
appliance's connection pipe, fitting a shut-off tap (A),
to allow the gas supply to be cut off when necessary.
Important
The tap (A), not supplied with the appliance,
must be installed in an easily accessi-
ble position and its status (on or off)
must be obvious at a glance.
This appliance shall be installed only
by authorised personnel and in ac-
cordance with the manifacture's installa-
tion instructions,
regulations, municipal building codes, wa-
ter supply regulations, electrical wiring reg-
ulations, AS 560/AG 601 - Gas installations
and any other statutory regulations.
IT
Always install a quick-closing ON/OFF valve (A)
AUS
(not supplied).
For natural gas equipment, fit the gas regulator
SDE
(B) supplied with the appliance to gas connec-
tion.
FR
ES
Caution - warning
For natural gas equipment this appliance
must be fitted with a Bromic Oara 98 gas reg-
ulator ( AGA Approval No.5862) supplied with
the appliance.
Do not use any other gas regulator. Ensure
regulator is fitted with respect to the gas flow
marked on the housing of the regulator.
WATER CONNECTION
GAS CONNECTION
local gas fitting
- 12 -
A
IDM-39603306900.tif
A
IDM-3960330700.tif
A
B
1_rubin copia.tif