Set Communication - ADF Web IO-Link / CAN User Manual

Industrial Electronic Devices

SET COMMUNICATION:

This section defines the fundamental communication parameters of CAN.
By Pressing the "Set Communication" button from the main window for SW67866 (Fig. 2)
the window "Set Communication" appears (Fig. 3).
The means of the fields for "IO-Link" are:
In the fields "Select Device" the type of IO-Link channels is defined;
The means of the fields for "CAN" are:
In the field "Baudrate" the baudrate for the CAN line is defined.
The means of the fields for the "Ethernet" section are:
In the fields "IP ADDRESS" the IP address of the converter is defined;
In the fields "SUBNET
In the fields "GATEWAY" the default gateway of the network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net.
ADFweb.com Srl – IT31010 – Mareno – Treviso
Mask" the SubNet Mask of the converter is defined;
User Manual IO-Link / CAN
Document code: MN67866_ENG Revision 1.000
Figure 3: "Set Communication" window
INFO: www.adfweb.com
Page 21 of 40
Phone +39.0438.30.91.31