Table of Contents
Advertisement
1
Introduction
CAUTION
Initial safety information
10
This instrument has autoranging line voltage input. Be sure the supply
voltage is within the specified range.
The laser source used in the Lightwave Component Analyzer is classified
as Class 1M according to IEC 60825-1 (2014).
All laser sources comply with 21 CFR 1040.10 except for deviations
pursuant to Laser Notice No. 50, dated 2007-06-24.
Laser Safety
Laser class 1M label
Figure 1
A sheet of laser safety labels is included. In order to meet the requirements
of IEC 60825-1 (2014) we recommend that you stick the laser safety
labels, in your language, onto a suitable location on the outside of the
instrument where they are clearly visible to anyone using the instrument.
Class 1M Safety Label
Keysight N4373E Lightwave Component Analyzer Setup Guide
Advertisement
Table of Contents
