Keysight Technologies N4373E Setup Manual page 23

Keysight N4373E Lightwave Component Analyzer Setup Guide
• 43.5/50 GHz LCA
• N5224B or N5225B NA according to ordered option
• 3x 85133-60043 f-m flexible test port MW cable (4-port network
analyzer) or 2x 85133-60043 f-m flexible test port MW cable
(2-port network analyzer)
• 1x 85056-60006 (2.4 mm f-f adapter)
• 67 GHz LCA
• N5227B NA according to ordered option
• 3x N4697-60030 f-m flexible test port MW cable (4-port network
analyzer) or 2x N4697-60030 f-m flexible test port MW cable
(2-port network analyzer)
• 1x N5520B-FG (1.85 mm f-f adapter)
(Mounting Kit part number N4373-88701)
• 2x 0403-1166 Adjustable Foot 65.0 mm
• 6x 0515-0433 Screw Torx-T20 M4X0.7 8mm
• 12x 0515-1269 Screw Torx-T20 M4X0.7 10mm
• 2x 0515-1619 Screw Torx-T20 M4X0.7 25mm
• 4x 0515-2317 Screw Torx-T15 M3.5X0.6 12mm
• 2x 83427-21274 Sidebar
• 2x 83427-40072 Trim Sidebar
• 2x N4373-25271 Bracket Adapter
• 1x N4373-25290 Bracket Rear Right
• 1x N4373-25291 Bracket Rear Left
Refer also to the contents list of the network analyzer.
If anything is missing or defective, contact your nearest Keysight
Technologies sales office. If the shipment was damaged, contact the
carrier, then contact the nearest Keysight Technologies sales office.
Setting Up the Instrument 2
23