Figure 58. Installing the hot-plug fan board
Next steps
1.
Install the Nvidia A100 GPU assembly.
2.
Install the GPU air
shroud.
3. Connect the drive backplane cables from the connector on the backplane.
4.
Install the middle top
5.
Install the GPU fans.
6. If removed,
install the front
7. Follow the procedure listed in
System memory
System memory guidelines
The PowerEdge XE8545 system supports DDR4 registered DIMMs (RDIMMs). System memory holds the instructions that are
started by the processor.
Your system memory is organized into eight channels per processor (two memory sockets per channel),16 memory sockets per
processor and 32 memory sockets per system.
60
Installing and removing system components
cover.
bezel.
After working inside your system
on page 24.