Removing The Cooling Fan Cage Assembly; Installing The Cooling Fan Cage Assembly - Dell EMC PowerEdge XE8545 Installation And Service Manual

Next steps
Follow the procedure listed in

Removing the cooling fan cage assembly

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the air shroud.
Steps
1. Lift the blue release levers to unlock the cooling fan cage assembly from the system.
2. Hold the release levers, and lift the cooling fan cage assembly from the system.
Figure 29. Removing the cooling fan cage assembly
Next steps
Install the cooling fan cage

Installing the cooling fan cage assembly

Prerequisites
1. Follow the safety guidelines listed in the
CAUTION: Ensure that the cables inside the system are correctly installed and retained by the cable
retention bracket before installing the cooling fan cage assembly. Incorrectly installed cables may get
damaged.
2. Follow the procedure listed in
3. Remove the air shroud.
Steps
1. Align the guide rails on the cooling fan cage assembly with the standoffs on the system.
2. Lower the cooling fan cage assembly into the system until the cooling fan cage connectors engage with the connectors on
the system board.
38 Installing and removing system components
After working inside your system
Safety instructions
Before working inside your system
assembly.
Safety instructions
Before working inside your system
on page 24.
on page 23.
on page 24.
on page 23.
on page 24.