Rear View Of The System - Dell EMC PowerEdge XE8545 Installation And Service Manual

Rear view of the system

Figure 4. Rear view of the system
Table 4. Rear view of the system
Item Ports, panels, or slots
1 PCIe expansion card riser
1 (slot 2 only)
2
Rear Handle
3
PCIe expansion card riser
2 (slot 6 only)
4
PCIe expansion card riser
3
5
System identification
button
6
iDRAC dedicated port
7 USB 2.0 port (1)
8 USB 3.0 port (1)
Icon Description
N/A The expansion card riser enables you to connect PCI Express
expansion cards. For more information on the expansion
cards that are supported on your system, see
poweredgemanuals.
N/A The rear handle is used as a bracing bracket for chassis rigidity in a
rack.
N/A The expansion card riser enables you to connect PCI Express
expansion cards. For more information on the expansion
cards that are supported on your system, see
poweredgemanuals.
N/A This expansion card riser enables you to connect to the internal
PCI Express device (GPU). For more information on the expansion
cards that are supported on your system, see
poweredgemanuals.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16
seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
● If the system stops responding during POST, press and hold
Enables you to remotely access iDRAC. For more information, see
the iDRAC User's Guide at www.dell.com/poweredgemanuals.
This port is USB 2.0-compliant.
This port is USB 3.0-compliant.
button is enabled in the iDRAC setup.
the system ID button (for more than 5 seconds) to enter
the BIOS progress mode.
PowerEdge XE8545 system overview
www.dell.com/
www.dell.com/
www.dell.com/
11