Drives; Removing The Drive Carrier - Dell EMC PowerEdge XE8545 Installation And Service Manual

Figure 32. Installing the side wall bracket
Next steps
1. Install the cooling fan
2. Install the air shroud.
3. Install the GPU air shroud.
4. Install the middle top
5. Follow the procedure listed in the

Drives

Removing the drive carrier

Prerequisites
1. Follow the safety guidelines listed in the
2. If installed, remove the front
3. Using the management software, prepare the drive for removal.
If the drive is online, the green activity or fault indicator blinks while the drive is powering off. When the drive indicators are
off, the drive is ready for removal. For more information, see the documentation for the storage controller.
CAUTION: Before attempting to remove or install a drive while the system is running, see the documentation
for the storage controller card to ensure that the host adapter is configured correctly to support drive
removal and insertion.
assembly.
cover.
After working inside your system
Safety instructions
bezel.
on page 24.
on page 23.
Installing and removing system components 41