Dell EMC PowerEdge XE8545 Installation And Service Manual page 52

Figure 45. Removing the GPU tray stopper
5. Disconnect the GPU power connector by pulling the strip that is connected to the power connector.
6. To disengage the GPU assembly from the connectors, follow the steps that are mentioned below:
a. Lift the GPU assembly handle to disengage the GPU tray clips.
b. Lift the clips to release them from the clip holders.
c. Ensure that the clips are free and lower the GPU assembly handle.
Figure 46. Unlocking the GPU assembly handle
7. Reinstall the GPU tray handles to the GPU tray and lock the plungers to lock them to the GPU tray.
52 Installing and removing system components