Installing The Gpu Air Shroud - Dell EMC PowerEdge XE8545 Installation And Service Manual

Figure 25. Removing the GPU air shroud
2. Tilt the front of the GPU air shroud and lift it out of the system.
Next steps
Replace the GPU air shroud.

Installing the GPU air shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the middle top
4. Disconnect all cables that are connected to the drive backplane.
Steps
1. Hold the GPU air shroud with the front tilted up at an angle.
2. Lower the GPU air shroud into the system and slide the GPU air shroud to the front of the system, until it clicks firmly into
place.
Safety instructions
Before working inside your system
cover.
on page 23.
on page 24.
Installing and removing system components 35