Air Shroud; Removing The Air Shroud; Installing The Air Shroud - Dell EMC PowerEdge XE8545 Installation And Service Manual

Air shroud

Removing the air shroud

Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
Hold the edges of the air shroud, and lift the air shroud out of the system.
Figure 23. Removing the air shroud
Next steps
Replace the air shroud.

Installing the air shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Align the slot on the air shroud with the standoff on the system.
2. Lower the air shroud into the system until it is firmly seated.
Safety instructions
Before working inside your system
Safety instructions
Before working inside your system
on page 23.
on page 24.
on page 23.
on page 24.
Installing and removing system components 33