Installing The Left Control Panel - Dell EMC PowerEdge XE8545 Installation And Service Manual

Figure 126. Removing the left control panel
Next steps
Replace the left control panel.

Installing the left control panel

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the middle top
4. Remove the air shroud.
5. Remove the cooling fan
6. Remove the side wall
Steps
1. Align and slide the left control panel in the slot on the system and secure them to the system with four screws.
2. Connect the left control panel cable to the connector on the system board.
3. Route the left control panel cable through the side wall of the system. Align the front top cover to the system.
NOTE: Route the cable properly to prevent the cable from being pinched or crimped.
Safety instructions
Before working inside your system
cover.
assembly.
bracket.
on page 23.
on page 24.
Installing and removing system components 119