Uninstall Software In 21Cfr11 Environments - Micromeritics ACCUPYC II 1345 Series Installation Instructions And Checklist

3 Software Installation
U S
NINSTALL OFTWARE IN
When the software is uninstalled using uninstall.exe, only the files required to run the application are
removed. Parameter files, sample files, reports, calibration files, and data files are not removed.
To uninstall the software, double click the uninstall.exe file located in the software installation
directory, then follow the prompts.
To uninstall the Micromeritics Confirm application, the owner of the application directory
and its contents must be set to the account of the administrator that is removing the
application installation. This account must also have permission to modify the
application directory and its contents. This may require modification to the owner and to
the access permissions of the application directory and its contents.
Upon uninstalling the Confirm application, the system administrator should go into
Windows Users and Groups to remove the Confirm users and groups. See the Confirm
Administrator Guide [part number 004-42821-01].
Depending on the network, Windows may not allow the uninstall.exe program to run. If this happens.
follow these steps:
1. In Windows Users and Groups, verify that the current user is not a member of the analyst
group or developer group. If so, remove the user from the group(s). Log OFF, then log back
ON to the computer.
2. In Windows Explorer, in the Confirm installation directory, double-click the uninstall.exe file to
run the uninstall program.
3 - 12
21CFR11 E
NVIRONMENTS
AccuPyc II 1345 Installation Instructions and Checklist
134-42875-02 (Rev A) — Jan 2021